This work package has been awarded to the below company.

This work package has been awarded to the below company.

This work package has been awarded to the below company.

This work package has been awarded to the below company.

This work package has been awarded to the below company.

See the attached scope of work for additional information.

P4038 EOT Cranes

This work package has been awarded to the below company.

P4006 Winder Rope Sheaves

P4013 Shaft Steel and Guides

P4016 Apron Feeders

C4119 Haywood Deed of Novation and Amendment

P4104 - Water Bore Equipment

The purpose of this package is to procure the design, supply and delivery of the rope handling equipment required for the TE2 rope installation/replacement.

The purpose of this package is for the supply of Dust Suppression Systems

P4074 Cablebot Drill Rig DS421-C

P4075 Purchase of Epiroc MT65 Underground Hault Trucks

P4091 Supply of Mining Equipment

P4120 Supply of Tadano 220T Mobile Crane

P4139 Supply of Particle Analyser and samples

P4151 Supply of generators

P4154 Supply of additional accomodation modules

P4502 Control systems integration services

S4111 Consultancy Civil and Architectural Design Assistance

S4118 Shaft Surveys

S4143 Refrigeration Engineering Design Services

S4197 Radial Stacker Design Audit

S4505 Review of Project Estimate

See attached scope of work for additional information.

C4058 - Camp Building Refurbishment

C4016 - Camp Installation Works

General Civil Installation

The scope of work includes all labour, materials and services for the design, supply, manufacture, testing and inspection at the supplier's works, delivery to site and off-loading by Newmont of all HV Power Cables

The Supplier shall be responsible for the design, supply, commissioning supervision and delivery of the Electrical HV Switchgear, including supply of all labour, equipment and consumables to facilitate the works.

The Supplier shall be responsible for the design, supply, delivery, and installation and commissioning assistance of the Hydraulic Cylinders and Power Packs, including supply of all labour, equipment and consumables to facilitate the works.

The purpose of this package is for the hire or purchase of generators and fuel tanks to support the provision of temporary power requirements on site for associated surface infrastructure during the TE 2 development.

The Supplier shall be responsible for the design, supply, delivery and commissioning assistance of the whole works as outlined above for the Waste Stacker Conveyor (CV205), including supply of all labour, equipment and consumables to facilitate the works.

S4187 Geotech Assistance

The scope of this package covers the design, supply, manufacturing, fabrication, heat treatment, corrosion protection, assembly, inspection, testing and certification shipping, and delivery, of the jack catches, energy absorption buffers and support frames for the Koepe and Double Drum Winders headframe over the travel arresting system

The scope of work covers the design, supply, manufacturing, fabrication, heat treatment, corrosion protection, assembly, shipping, inspection, testing, certification, and delivery to Site of the rope attachments for the Koepe production winder and double drum personnel-riding winder.

This work package has been awarded to the below company.

P4094 - Water Treatment Plant

The scope of this package covers civil construction, structural, mechanical and piping (SMP) and electrical (E&I) installation and commissioning for the underground ore handling system See attached scope of work for additional information

Please note that this package SOW was revised and re-opened on Monday 6/7/2020.

Design and Construct the Surface Refrigeration Plant with associated cooling towers, surface bulk air cooler (BAC) located at the Production Shaft, BAC force fans as well as overland chilled water pump stations. The Turnkey (Design and Construct) package will include associated process, mechanical, civil, structural, electrical and C&I disciplines. The scope will generally include all detailed engineering design, equipment supply, critical spares, transport to site, construction, construction supervision and commissioning.

The TE2 project scope includes the installation of Surface Non-Process Infrastructure at the DBS mineral lease site. This infrastructure consists of various design and construct contract awarded facilities as well as some supply only packages and general surface works that require a civil and SMP construction contractor to construct or install. See attached scope of work for additional information

The scope of work covers the design, supply, manufacturing, corrosion protection, assembly, inspection, testing, certification, shipping, and delivery to site, and final installation inspection on Site of the winder ropes for the Koepe production winder and double drum personnel-riding winder, and all ancillaries and spare ropes.

P4014 - Fixed Rock Breaker

The purpose of this package is for the supply and delivery of two Positive displacement piston diaphragm pumps, charge pumps (if applicable), complete with cooling units, pulsation dampeners, pressure relief valves, drives, gearboxes and couplings.

The new laboratory requires trained operators to provide geotechnical testing and quality control for all concrete in accordance with National Association of Testing Authorities (NATA) requirements to support a continuous mining operation.

The scope of work covers the design, supply, manufacturing, fabrication, heat treatment, corrosion protection, assembly, shipping, delivery to site, inspection, testing, certification, and final installation inspection on site of the arresting devices for the Koepe production winder and double drum personnel-riding winder.

The purpose of this document is to provide a Scope of Work associated with the furnishing of all labour, materials and services for the supply, fabrication, shop floor trial assembly, and packaging of the Fibre Reinforced Polymer (FRP) Sub-Brace BAC Ventilation Cowling as specified in the contract documents, as part of the Tanami Production Shaft.

S4216 Consultancy Services for Slewing Conveyor FEED

S4230 Full Potential affiliate agreement

P4030 - Drum Winder

The Supplier shall be responsible for the design, supply and delivery of the whole works, including such work as may be required, but not specifically described here; and will supply all labour, equipment and consumables to facilitate the works.

P4057 Lighting

C4022 DBS Village Telstra Network Installation

P4071 Vibrating Feeder & Feed Chute

P4035 Headframe Elevator

The scope of work shall comprise the fabrication of the Plat, Flask Loading, Shaft Bottom and Cranes Structural Steel Works

P4100 Clamping and Lifting Device

Scope covers miscellaneous electrical site works. For additional information see scope of work.

Landscape Architecture

P4015 - Gyratory Crusher

P4094a - Waste Water Treatment Plant

P4501 General Pumps

C4065 Crusher Chamber Grouting Services

Additional Kitchen Diner Modules

Architectural Master Planning

P4028 Compressors

P4507 Monorails & Winches

C4016 - Camp Bulk Earthworks and Drainage

Boreline Installation

The scope of work covers the design, supply, supervision of installation and commissioning assistance of the underground refuge chambers.

P4509 Mobile Rock Breaker

C4094 Hire of Buildings

C4013 - Modular Building Supply

C4014 - Production Raisebore (Equipping)

The scope of work covers the supply of UG Transportable Electrical Switchrooms

See attached scope of work of additional information.

This work package has been awarded to the below company.

C4040 - Haul Road Construction

See attached scope of work for additional information.

C4006 - Pilot Hole and Raisebore

Please see attached scope of work for additional information.

The purpose of this package is for the supply and delivery of the Radial Stacker conveyor CV-204.

P4031 - Koepe Winder

P4018 - Headframe

See attached scope of work for additional information.

See attached scope of work for additional information.

The purpose of this package is for the supply of conveyors' structural steelwork and conveyor equipment for the surface and underground materials handling systems.

The Supplier shall be responsible for the design, supply, commissioning supervision and delivery of the whole works, including such work as may be required, but not specifically described here; and will supply all labour, equipment and consumables to facilitate the works. The scope of this package covers the design, supply, manufacturing, fabrication, heat treatment, corrosion protection, assembly, shipping, delivery, inspection, testing and certification of the Diesel Storage Tanks & Dispensing Units. See attached scope of work for additional information

The scope of work covers the design, certification, fabrication, heat treatment, inspection, testing, corrosion protection, assembly, packaging, and delivery to Site, of the skips, bridles, and flasks for the Koepe Production Winder

The scope of work covers the design, certification, fabrication, heat treatment, quality assurance, testing, corrosion protection, assembly, factory acceptance test, packaging, and delivery to Site, of the cage and counterweight for the Double Drum Personnel-riding Winder

The Supplier shall be responsible for the design, supply and commissioning of the equipment as outlined above for the Foam Fire Suppression System, including supply of all labour, equipment and consumables to facilitate the works.