Newmont Australia
TANAMI EXPANSION 2 (TE2) PROJECT
Newmont Goldcorp has mine operations located in the Tanami Desert of the Northern Territory of Australia. These operations comprise the Granites Processing plant, located 560 km northwest of Alice Springs and 940 km southwest of Darwin and Dead Bullock Soak (DBS), located 42 km to the west of The Granites Processing Plant. The TE 2 project aims to provide a deepening and expansion of the Callie Underground Mine at DBS to access ore at depth and increase production to 3.2 million tonnes per annum.
Newmont Australia
NT Australia
Work Packages
General Updates
Express interest to be notified of any updates or opportunities that may arise.
Full Scope
Work Packages
Scope of this package covers works on site including supply and installation of electrical and communications work as required. Cable Trenching, lighting, DBs, HV cable, generators, fibre, communications equipment, conduit etc. Vendor would be required to mobilise own equipment to site for installation works.
Concrete Batch Plant Operation and Maintenance
The Supplier shall be responsible for the design, supply, commissioning supervision and delivery of the equipment as outlined above for the Motor Control Centres, including supply of all labour, equipment and consumables to facilitate the works.
The scope of work covers the
. Design of the oil separator system
. Supply, manufacturing, testing and delivery to site of equipment
. Supervision of installation and commissioning assistance, inspection and testing of the oil separator.
See attached scope of work for additional information
See attached scope of work for additional information.
P4505 Ontrak Transporter
Carry out soil resistivity testing on site, use test data to complete detailed lightning and earthing study designs to Australian Standards based on layout drawings.
The purpose of this package is to design, configure and implement IT/OT networking equipment to Newmont standards using CISCO equipment. Extensive knowledge of networking and Newmont systems would be required.
Additional Kitchen Diner Modules
Architectural Master Planning
C4006 - Pilot Hole and Raisebore
This work package has been awarded to the below company.
C4013 - Modular Building Supply
C4014 - Production Raisebore (Equipping)
C4016 - Camp Bulk Earthworks and Drainage
C4016 - Camp Installation Works
See attached scope of work for additional information.
The scope of this package covers civil construction, structural, mechanical and piping
(SMP) and electrical (E&I) installation and commissioning for the underground ore
handling system
See attached scope of work for additional information
C4022 DBS Village Telstra Network Installation
Please note that this package SOW was revised and re-opened on Monday 6/7/2020.
Design and Construct the Surface Refrigeration Plant with associated cooling towers, surface bulk air cooler (BAC) located at the Production Shaft, BAC force fans as well as overland chilled water pump stations. The Turnkey (Design and Construct) package will include associated process, mechanical, civil, structural, electrical and C&I disciplines. The scope will generally include all detailed engineering design, equipment supply, critical spares, transport to site, construction, construction supervision and commissioning.
See the attached scope of work for additional information.
Boreline Installation
C4040 - Haul Road Construction
C4058 - Camp Building Refurbishment
Scope covers miscellaneous electrical site works. For additional information see scope of work.
C4065 Crusher Chamber Grouting Services
See attached scope of work for additional information.
The TE2 project scope includes the installation of Surface Non-Process Infrastructure at the DBS mineral lease site. This infrastructure consists of various design and construct contract awarded facilities as well as some supply only packages and general surface works that require a civil and SMP construction contractor to construct or install. See attached scope of work for additional information
C4094 Hire of Buildings
This work package has been awarded to the below company.
C4119 Haywood Deed of Novation and Amendment
General Civil Installation
Landscape Architecture
P4006 Winder Rope Sheaves
The purpose of this package is to procure the design, supply and delivery of the rope handling equipment required for the TE2 rope installation/replacement.
Birch Acres Ext 7
Kempton Park, 1619
Republic of South Africa
The scope of work covers the design, supply, manufacturing, corrosion protection, assembly, inspection, testing, certification, shipping, and delivery to site, and final installation inspection on Site of the winder ropes for the Koepe production winder and double drum personnel-riding winder, and all ancillaries and spare ropes.
The scope of work covers the design, supply, manufacturing, fabrication, heat treatment, corrosion protection, assembly, shipping, inspection, testing, certification, and delivery to Site of the rope attachments for the Koepe production winder and double drum personnel-riding winder.
The scope of work covers the design, certification, fabrication, heat treatment, inspection, testing, corrosion protection, assembly, packaging, and delivery to Site, of the skips, bridles, and flasks for the Koepe Production Winder
The scope of work covers the design, certification, fabrication, heat treatment, quality assurance, testing, corrosion protection, assembly, factory acceptance test, packaging, and delivery to Site, of the cage and counterweight for the Double Drum Personnel-riding Winder
P4013 Shaft Steel and Guides
P4014 - Fixed Rock Breaker
P4015 - Gyratory Crusher
P4016 Apron Feeders
The purpose of this package is for the supply of conveyors' structural steelwork and conveyor equipment for the surface and underground materials handling systems.
P4018 - Headframe
P4028 Compressors
The Supplier shall be responsible for the design, supply, commissioning supervision and delivery of the Electrical HV Switchgear, including supply of all labour, equipment and consumables to facilitate the works.
P4030 - Drum Winder
P4031 - Koepe Winder
This work package has been awarded to the below company.
P4035 Headframe Elevator
The purpose of this package is for the supply and delivery of two Positive displacement piston diaphragm pumps, charge pumps (if applicable), complete with cooling units, pulsation dampeners, pressure relief valves, drives, gearboxes and couplings.
P4038 EOT Cranes
The Supplier shall be responsible for the design, supply, commissioning supervision and
delivery of the whole works, including such work as may be required, but not specifically
described here; and will supply all labour, equipment and consumables to facilitate the
works. The scope of this package covers the design, supply, manufacturing, fabrication,
heat treatment, corrosion protection, assembly, shipping, delivery, inspection, testing and
certification of the Diesel Storage Tanks & Dispensing Units.
See attached scope of work for additional information
The Supplier shall be responsible for the design, supply and commissioning of the equipment as outlined above for the Foam Fire Suppression System, including supply of all labour, equipment and consumables to facilitate the works.
The new laboratory requires trained operators to provide geotechnical testing and quality control for all concrete in accordance with National Association of Testing Authorities (NATA) requirements to support a continuous mining operation.
The purpose of this package is for the hire or purchase of generators and fuel tanks to support the provision of temporary power requirements on site for associated surface infrastructure during the TE 2 development.
The Supplier shall be responsible for the design, supply and delivery of the whole works, including such work as may be required, but not specifically described here; and will supply all labour, equipment and consumables to facilitate the works.
See attached scope of work of additional information.
P4057 Lighting
The scope of work covers the supply of UG Transportable Electrical Switchrooms
See attached scope of work for additional information.
The scope of work covers the design, supply, supervision of installation and commissioning assistance of the underground refuge chambers.
The purpose of this package is for the supply and delivery of the Radial Stacker conveyor CV-204.
The scope of work covers the design, supply, manufacturing, fabrication, heat treatment, corrosion protection, assembly, shipping, delivery to site, inspection, testing, certification, and final installation inspection on site of the arresting devices for the Koepe production winder and double drum personnel-riding winder.
The scope of work shall comprise the fabrication of the Plat, Flask Loading, Shaft Bottom and Cranes Structural Steel Works
P4071 Vibrating Feeder & Feed Chute
The purpose of this package is for the supply of Dust Suppression Systems
P4074 Cablebot Drill Rig DS421-C
P4075 Purchase of Epiroc MT65 Underground Hault Trucks
P4091 Supply of Mining Equipment
P4094a - Waste Water Treatment Plant
P4094 - Water Treatment Plant
The Supplier shall be responsible for the design, supply, delivery, and installation and commissioning assistance of the Hydraulic Cylinders and Power Packs, including supply of all labour, equipment and consumables to facilitate the works.
P4100 Clamping and Lifting Device
P4104 - Water Bore Equipment
P4120 Supply of Tadano 220T Mobile Crane
The scope of work includes all labour, materials and services for the design, supply, manufacture, testing and inspection at the supplier's works, delivery to site and off-loading by Newmont of all HV Power Cables
The purpose of this document is to provide a Scope of Work associated with the furnishing of all labour, materials and services for the supply, fabrication, shop floor trial assembly, and packaging of the Fibre Reinforced Polymer (FRP) Sub-Brace BAC Ventilation Cowling as specified in the contract documents, as part of the Tanami Production Shaft.
P4139 Supply of Particle Analyser and samples
See attached scope of work for additional information.
P4151 Supply of generators
P4154 Supply of additional accomodation modules
P4501 General Pumps
P4502 Control systems integration services
The scope of this package covers the design, supply, manufacturing, fabrication, heat treatment, corrosion protection, assembly, inspection, testing and certification shipping, and delivery, of the jack catches, energy absorption buffers and support frames for the Koepe and Double Drum Winders headframe over the travel arresting system
P4507 Monorails & Winches
The Supplier shall be responsible for the design, supply, delivery and commissioning assistance of the whole works as outlined above for the Waste Stacker Conveyor (CV205), including supply of all labour, equipment and consumables to facilitate the works.
P4509 Mobile Rock Breaker
Please see attached scope of work for additional information.
S4111 Consultancy Civil and Architectural Design Assistance
S4118 Shaft Surveys
This work package has been awarded to the below company.
S4143 Refrigeration Engineering Design Services
S4187 Geotech Assistance
S4197 Radial Stacker Design Audit
S4216 Consultancy Services for Slewing Conveyor FEED
S4230 Full Potential affiliate agreement
S4505 Review of Project Estimate
See attached scope of work for additional information.
See attached scope of work for additional information
See attached scope of work for additional information
See attached scope of work for additional information.
See attached scope of work for additional information.
See attached scope of work for addational information
As part of the Tanami Expansion Project 2 (TE2), a new village will be developed at the mining operations area known as Dead Bullocks Soak, for now the village is referred to as the DBS Village. The village operates as a residence for personnel and visitors working at the DBS mining operations. The village is expected to have a staged lifespan of up to 20 years. The scope of works includes all soft-scaping and hardscaping for the DBS mine village (design by others).
See attached scope of work for additional information.
See attached scope of work for additional information.
The Contractor shall be responsible engineering and design of the Facilities as specified including preparation of all drawings, specifications and other documents required for activities to be performed by Contractor, Subcontractors and Vendors to construct, commission and handover the Facilities. The Contractor shall ensure that engineering and design for all systems and subsystems meets the minimum production and performance requirements.
The Contractor's Scope of Work is for the procurement, construction, and commissioning support necessary to implement the planned upgrades at the Granites processing facility. Briefly, this work includes:
Please refer to attached scope document for further information.
