PIOP MINE CO PTY LTD

Blacksmith Project

Overview

Project Details

Fortescue proposes to develop the Blacksmith mine, a new iron ore mine located in the Pilbara region of Western Australia (the Project). Ore mined and crushed at the Project will be transported by way of overland conveyor to the Proponent's existing Solomon Mine for processing.

Scope Overview

The Project will involve the construction of a primary crushing plant and associated non-processing infrastructure, an overland conveyor, an elevated crossing structure, 220 kV power transmission and 33 kV distribution overhead lines (including optical ground wire), services infrastructure, mine access roads, camp access roads, and maintenance tracks.

Indicative Timeline

Procurement activities are scheduled to commence in H1 of FY2027.

Construction is scheduled to commence in H2 of FY2027.

First ore on train is expected in Q1 CY2029.

Local and Indigenous participation

In line with Fortescue's commitment to supporting local Western Australian communities, requirements relating to the engagement of local and Indigenous vendors will be included in the selection criteria for the Project tendering opportunities.

Blacksmith Project

PIOP MINE CO PTY LTD

location_on

WA Australia


Project Primary Contact
person_outline
Joelle Lim
phone
+61 08 9365 7623
mail Send Email
Work Package
EOI Open Date
EOI Close Date
Status
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

Key package details are as follows: . Fifty-seven (57) conveyor pulleys ranging in sizes with diameters from 600mm to 1600mm, and face width from 1650mm to 2350mm; . Each pulley consists of: o Shell, shaft and end discs; o Shafts will include machined areas for the mounting of bearings and drive extensions for mounting of drive couplings; o Bearings and housings; and o Lagging ceramic or rubber as nominated by PIOP Mine; . Ancillary items and fasteners normally supplied with conveyor pullies and any special tools required; and . All materials, equipment and all other services and items necessary for the completion of the supply. *Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

Key package details are as follows: . Idler assemblies for six (6) overland conveyors and three (3) plant conveyors, totalling approx. 52km length. Predominantly 1500mm belt width, with range from 1400mm to 2200mm. . Idler assembly types include: o Jackdown impact idler assemblies; o Jackdown carry idler assemblies; o Trough carry idler assemblies; o V-return idler assemblies; o Flat carry and return idler assemblies; o Training carry and return idler assemblies; and o Transition idler assemblies; . Each idler assembly consists of: o Rollers, with rubber discs, lagging, shaft, end discs, bearings and bearing seals; o Assembly frame; o Guide rollers (where required); and o Stone guards and fixings; . Ancillary items, retainer plates and clips normally supplied with conveyor idlers and frames, and any special tools required; and . All materials, equipment and all other services and items necessary for the completion of the supply. *Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

Key package details are as follows: . Two (2) off hydraulic cylinder actuated horizontal knife gates to isolate 220mm (P100) primary crushed ore from the bin, with expected opening of approx. 2.1m x 5m; . Each isolation gate consists of: o Gate, frames, liners; o Hydraulic actuation, hydraulic power unit; o Electrical motor and control; . Gates shall be side opening (long width); . Ancillary items normally supplied with isolation gates and any special tools required; and . All materials, equipment and all other services and items necessary for the completion of the supply. *Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

The Supply of Transformers includes the design, manufacture, testing, packaging and delivery of 33 kV transformers. Key package details are as follows: . nine (9) 33/0.723 kV pad-mounted (4000 to 6000 kVA) KNAN with ester, hermetically sealed, FM3990 approved or equivalent transformers; . twenty-two (22) 33/0.433 kV pad-mounted (500 to 1500 kVA) KNAN with ester, hermetically sealed, FM3990 approved or equivalent transformers; . fifteen (15) 33/0.433 kV pole-top (100 to 315 kVA) KNAN with ester, hermetically sealed transformers; and . all materials, equipment and all other services and items necessary for the completion of the supply. *Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

The Supply of Switchrooms includes the design, manufacture, fit-out, integration, testing, packaging and delivery of 33kV/LV switchrooms.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

The Supply of HV Switchgear includes the design, manufacture, assembly, testing, packaging and delivery of switchboards and ring main units.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

The Supply of Active Take-up System includes the design, manufacture, assembly, factory testing, packaging and delivery of various conveyor active take-up systems. Key package details are as follows: . Six (6) conveyor active take-up systems with peak dynamic take-up belt tension ranging up to 800 kN, rope length ranging up to 320m and trolley travel ranging up to 80m; . Each take-up system consists of: o motor including couplings and guards, and common baseplate; o drum; o wire ropes; o sheaves and frames; o rope guards where specified; o rope guides/retainers where necessary; and o winch accessories such as Crosby clamps, thimbles and bolts; . Ancillary items normally supplied with an active take-up system, and any special tools required; and . All materials, equipment and all other services and items necessary for the completion of the supply. *Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

The Supply of Hybrid Feeders includes the design, manufacture, assembly, surface treatment, factory testing, packaging and delivery of two (2) heavy-duty hybrid feeders.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

the Supply of Conveyor Drives includes the design, manufacture, assembly, surface treatment, factory testing, packaging and delivery of various conveyor drives. Key package details are as follows: . Fifteen (15) conveyor drives ranging in size from 315kW to 2500kW, with three (3) at 415V, and twelve (12) at 690V; . Each conveyor drive consists of: o Gearbox complete with couplings; o Electric motor; o Holdbacks (where required); o Brakes complete with discs, callipers, motor and hydraulic unit; o Cooling units (where required); o Torque arm connection; o Condition monitoring instrumentations; o Guards; and o All of the above assembled on a drive frame complete with torque arm and attachment mechanism to the structure. . Ancillary items normally supplied with conveyor drives and any special tools required; and . All materials, equipment and all other services and items necessary for the completion of the supply. *Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

The Administration Building package comprises the design, supply, installation and commissioning of an administration building, office buildings, and a medical and emergency response facility for the Project. Key package details are anticipated to include: . A main administration building (approximately 1,340 m) incorporating open-plan work areas, meeting rooms, enclosed offices and associated staff amenities, including integrated crib and ablution facilities; . Three (3) office buildings (approximately 500 m each), each incorporating open-plan work areas, meeting rooms, and integrated ablution and crib facilities; . A medical and emergency response facility to support site operations; . Internal finishes, fixtures, furniture and fit-out; . Electrical installations, lighting, data cabling, communications and audiovisual provisions; . Heating, ventilation and air conditioning, hydraulic services, and fire and life safety systems; . Covered outdoor areas and bus drop-off provisions; and . Supporting foundations, cyclone tie-downs, access provisions and connections to site services within the package boundaries. Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

, the Central Facilities package comprises the design, engineering, procurement, supply, construction, installation, testing, commissioning and handover of the central maintenance and operational support facilities for the Project. Key package details are as follows: . Heavy Mobile Equipment (HME) maintenance and fabrication workshops, and a tyre change facility; . Light Vehicle and Support Mobile Equipment (LV/SME) and fixed plant maintenance workshops; . Fixed Plant maintenance workshop; . Mine services workshops; . Warehouse and tool stores; . Hydrocarbon storage and handling facilities; . HME and LV/SME washdown facilities; and . Associated detailed earthworks, foundations, slabs, workshop equipment and fit-out, utility distribution, service connections, access, parking, drainage, laydowns and external works within the package boundaries. Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
lock
Login to View Details
Login
If you do not have a business profile, you can
create one to get started

Supply of Remote Facilities comprises the design, supply and delivery of transportable office, crib and ablution facilities to support Project activities across the site. Key package details are as follows: . Transportable site offices, crib rooms and ablution facilities configured to suit the nominated occupancy and operational requirements; . Associated building services, electrical installations, air conditioning, hydraulic systems, fire and life safety provisions, and communications infrastructure within the package scope; . Stand-alone renewable power systems, generator inlets, and applicable potable water and wastewater storage systems; and . Transportation and delivery to the nominated laydown area, including provisions for securing and preserving the facilities during storage. Optional scope may include furniture and fit-out, automated boom gates, gatehouse, installation and commissioning support. Australian Standards apply to this package.

Status
Open
EOI Open Date
••••••••
EOI Close Date
••••••••
brightness_1 Full Scope
brightness_2 Partial Scope
Note: You can fill out an Expression of Interest form exclusively on a computer or laptop device.
Loading...